WRT54GS
From rukapedia
Installing OpenWRT
- Grab this Perl script
- Find the section that reads:
"ping_times" => "1", "ping_ip" => "`$command >/tmp/ping.log 2>&1`",
- Change this to:
"ping_times" => "`$command >/tmp/ping.log 2>&1`", "ping_ip" => "127.0.0.1",
- Connect the port #1 on the WRT54GS directly to your iMac's Ethernet port.
- Run the Perl script:
./wrt54gcli.pl
- You're now talking to the WRT54GS using a simulated terminal. Execute the following commands to set the boot_wait NVRAM setting to "on":
/usr/sbin/nvram set boot_wait=on /usr/sbin/nvram get boot_wait # Should display 'on' /usr/sbin/nvram commit